Soft washing vs pressure washing: which does your house need?

Your walls, porch ceiling and roof need soft washing, and your driveway, sidewalk and patio need pressure washing, so most houses need both, on different parts. The difference is where the cleaning power comes from: soft washing lets a cleaning solution do the work at low pressure, and pressure washing uses the force of the water itself.

The short answer

  • Soft wash: siding, trim, eaves, porch ceilings, stucco and roofs.
  • Pressure wash: concrete driveways, walks and patios.
  • Gentle, low pressure: wood decks and fences, in between the two.

What each one is

Soft washing is low pressure. I put a cleaning solution on the surface, give it time to loosen the green and the grime, then rinse it all off. The solution does the cleaning, so the wall never has to take a hit.

Pressure washing is high pressure. The water does the cleaning by force, which is right for a surface hard enough to take it and wrong for one that isn't. People also call it power washing, and most use the two names for the same job.

The question to ask is never "which machine?" It's "how much force can this surface take?"

Surface by surface

Surface Method Why
Painted wood siding Soft wash High pressure can lift old paint and scar the wood underneath
Vinyl siding Soft wash High pressure can drive water up behind the panels
Trim, eaves and porch ceilings Soft wash Painted, overhead and often old; the solution reaches the growth without force
Stucco Soft wash High pressure can gouge the surface and push water into hairline cracks
Old brick walls Soft wash Old brick and its mortar can wear away under high pressure
Shingle roof Soft wash, then a gentle low-pressure rinse High pressure loosens the granules that protect the shingles
Tile roof Soft wash, then a gentle low-pressure rinse High pressure can crack tiles or knock them loose
Painted porch floor and steps Soft wash or low pressure Enough to clean, not enough to lift the paint
Wood deck and fence Gentle, low pressure Too much force raises the grain and leaves the wood fuzzy
Concrete driveway, sidewalk and patio Pressure wash Concrete can take it, and ground-in grime needs the force

Why it matters more on houses here

A lot of houses in New Orleans are older than the machines used to clean them. Wood siding under many coats of paint, soft old brick, porch ceilings that have been painted a dozen times: these are exactly the surfaces that suffer if someone treats them like a driveway. Once paint lifts or wood scars, a clean wall has turned into a painting job.

The climate makes the choice matter twice. The green on a wall here comes back, so most houses get washed about once a year, and a house in heavy shade or under oaks twice. Ten years of gentle washes is fine for old siding. Ten years of hard ones is not.

Before any soft wash I wet down your plants, and I ask about old wood, fresh paint and anything fragile before I start.

When a plain rinse is enough

Not every surface needs either method:

  • Light pollen on a sunny wall. In spring, a yellow film on siding that gets full sun will often rinse off with a garden hose.
  • A patio that's just dusty. If there's no green and no staining, a sweep and a hose will do it.
  • A porch ceiling that's still its own color. If you can't see gray from the steps, it can wait.

I'd rather tell you that than sell you a wash you don't need.

What each one costs

A house wash, which is a soft wash, is $349 for a one-story house and $449 for a two-story, with the porch and porch ceiling included. On the pressure washing side, a two-car driveway is $175, a sidewalk or front walk $150 and a patio $175. Roof cleaning is a soft wash and a gentle rinse, done from up on the roof, at $450 for a shingle roof and $600 for tile. A house wash and a driveway on the same visit, one-story, are $445 instead of $524. Every price is on the pricing page.

CallTextGet a quote